Lift any load effortlessly
Stability and Safety
for all heavy loads
There are as many lifting beam models as our customers have requirements, all strictly complying with design and manufacturing regulations. They can be fixed, adjustable, in the form of “H”, rectangular, rotating, telescopic ... Handle loads from 100 kilograms to 180 tonnes.
Information about our Lifting Beams


They are custom designed to solve the lifting of loads of each client.
PRODUCT DESCRIPTION
Lifting Beams are elements for the handling of loads. They are placed between the crane and the tool to be manipulated to improve the stability and safety of the movement of the load.
There are as many lifting beam models as our customers have requirements. They are custom designed to solve the lifting of loads of each client, strictly complying with design and manufacturing regulations. They can be fixed, adjustable, in the form of “H”, rectangular, rotating, telescopic … Or a mixture of all. We have designed and manufactured lifting beams to handle loads from 100 kg to 180 tonnes.
They are usually manufactured with a beam, structural tube or electrowelded box to which the necessary upper and lower suspension elements are added. The upper elements are those that are attached to the crane (or cranes) and the lower elements are those that are attached to the load.
MAIN FEATURES OF LIFTING BEAM HIRE
- Lifting Beam Design to withstand dynamic effects at lifting speeds of up to 20m / min.
- Calculation and analysis by finite elements.
- Work with the center of gravity centered on the whole.
- Maximum inclination of the lifting beam: 6º with respect to the horizontal.
Features of the Eco Beam
MATERIAL
The basic finishing of our products consists of Sa 2.5 sandblasting according to ISO 8501-1 standards. One layer of zinc phosphate epoxy primer with a thickness of 50 microns and two layers of polyurethane enamel colour RAL 1028. Other grades on request.
FINISH
The material we have used is: S275 steel for beams and S355 steel for the rest of materials. We can design spreader beams in high elastic limit depending on the customer premises.
IN ACCORDANCE WITH
We comply with the provisions in the Directive 2006/42/ EC of the European Parliament and of the Council of 17 May 2006 on machinery and it has been manufactured in accordance with the following norms:
CERTIFICATES
UNE-EN ISO 12100: 2012. Safety of machinery - General principles for design - Risk assessment and risk reduction.
UNE-EN 13155:2004+A2:2009. Cranes. Security, static equipment for lifting loads.
UNE-EN ISO 3834-2:2006. Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirement.
FEM5 building section. Lifting speed 20m/min
Main Types of Lifting Beams
Suspension Elements
THE TOP SUSPENSION ELEMENTS
An important issue when working with Lifting i Beam are the top suspension elements are used to join crane lifting beam that is going to perform the movement. In the lifting beam design is important to know the crane or cranes to be used and to know the center of gravity of the load to be handled.
SIMPLE EYE
All these models of bottom suspensions can be placed twice or combine some of them to work with the load as stable as possible
MASTER LINK
Fixed top suspension that allows to change the master link (for one of the same load or higher) depending on the hook of the crane.
PIN
Fixed top suspension with removable pin. It allows to reduce the height and is valid for a wider range of measures of crane hooks.
MASTER LINK WITH TWO LEGS
Fixed top suspension. With the 2 leg chain sling the movement is more stable and reduces the tare of the lifting beam but increases the lost height. If you change the center of gravity of the load, shorteners can be placed
MULTI POSITION PLATE FOR MASTER LINKS
Fixed top suspension that allows regulation. You can change the position of the master link to match the center of gravity.
MASTER LINK WITH TWO LEGS
Fixed top suspension that allows regulation. You can change the position of the shackle to match the center of gravity.
MODELS OF THE BOTTOM SUSPENSION
All these beam lifting models of bottom suspensions can be placed twice or combine some of them to work with the load as stable as possible.
EYE IN THE END
Fixed bottom suspension. Two plates can be placed with one or more holes for shackles at the ends.
DOUBLE HOOK IN THE END
Fixed bottom suspension with hooks on the lifting beam end plate. Made to measure with security closure.
WELDABLE HOOK IN THE END
Fixed bottom suspension with welded hooks placed at the ends
WELDABLE HOOK IN BEAM
Fixed lower suspension with welded hooks placed along the length.
FIXED EYE
Fixed bottom suspension. They can be placed at the ends or throughout the length with one or more shackle holes
SUSPENSION HOOK
Fixed bottom suspension with market suspensions coupled to our lifting beam.
MULTI-EYE SHEET
Fixed bottom suspension that allows regulation. You can change the position shackle to the desired length.
BOTTOM MOVABLE FIXATION
Adjustable bottom suspension. The plate is moved with the incorporated shackle, without the need to disassemble any part.
Quality and Testing
One of our company policies is quality, that is why all our Beam Lifting go through extreme testing. Our lifting beam design team sizes what you need with a lifting beam calculator.
The lifting beam for forklifts always work below the hook, with twin hoist lifting.
We even have four point beam for heavy duty twin… And we have distributors in the main countries of the world.
We have a rental service for lifting beams.