Perfect Solution for the Displacement of Heavy Loads
5TH GENERATION
Full 360º turn
The OX self-propelled Trolleys (or Machine movers) consist of a motorised tool for loading and moving loads, usually to introduce or remove equipment from confined spaces without access to other means such as cranes and therefore represent an ideal equipment to complement a crane in a transport service or relocation of equipment.
Information About Self Propelled Trolley
THE PERFECT SOLUTION FOR ALL NEEDS OF DISPLACEMENT
The Self propelled trolley have a large load capacity from 30 to 200 Tons and a very low height (260 mm up to 450 mm), with the possibility of making complete turns of 360º designed to place them under any type of element and displacement, you can also use motor driven trolleys models with hydraulic lifting cylinder to load in cars or racks and has a speed of up to 5m / min max. depending on the model.
Self-Propelled Trolley Set
COMPONENTS AND FEATURES
The OX self-propelled trolley set consists of two parts which are supplied separately, the self-propelled trolley itself which consists of the load traction element (References ST, TBC or MiniForce) and on the other hand the rear trolleys (Reference CT), which are placed on the other side of the load parallel to each other forming a triangle with the trolley where the load rests.
The support points of the load are covered with rubber and the support point on the trolley is a free turning plate that allows partial or complete unlimited turning on itself, which allows it to turn with a small radius only limited by the adherence of the load on the rear carriages themselves.
CONTROL MECHANISMS
All self-propelled trolleys are controlled by means of a joystick control via radio control and, as an auxiliary, by means of a cable-operated push-button control.
POWER SOURCES
The trolleys can have different power sources, battery, main power (220V or 380V) or even both types according to need (TBC and Miniforce). Also, depending on the model, they can have an integrated load lifting system (TBC) or the lifting must be done by additional means (ST or MONIFORCE), either by crane or by hydraulic jacks (you can ask our sales team for further information about hydraulic jacks or hydraulic cylinders).
SAFETY FEATURES
The maximum speed is slow for safety in order to allow a quick and smooth stop. The value is variable depending on the model and the type of power supply: battery or mains connection, and in this case it also changes whether it is connected to 50 or 60Hz.
The trolleys are designed for horizontal displacements, although due to their geometry and capacity, they can face specific slopes of up to 2º, in which case additional load retention systems must be used to guarantee the complete safety of the manoeuvre and under the responsibility of the user of the equipment.
“After 9 years of development and continued work with our trolleys, from the initial version “0th Generation” to the current “5th Generation”, I can affirm that our trolleys are the most versatile, robus, and with the better quality-price on the market.”
Rubén Blasco | CEO
Some Of Their Advantages
Electric or Batteries
Only trolley on the market with two power options included: batteries and 220v mains electricity
Very Easy Maneouvrability
Complete turns of 360º designed to place them under any type of element and displacement
Incredible Short Height
Short height for big loads, low consumption servo motors,… and much more!
Self Propelled Trolley Models
MINIFORCE30 TROLLEY
30 tons
- Monophase 220v + Batteries
- Autonomy of up to 1.5 h
- Capacity up to 30 tons
- Wi-Fi connection
- Touch control screen
- Speed of up to 5.5 m/min
- Camera and R/C control
TBC SELF-POWERED TROLLEY
60 and 100 tons
Electro-hydraulic with lifting cylinder and dual operation:
- Connection to three-phase network or batteries
- Autonomy of up to 1 h
- Capacities 60 and 100 tons
- Speed up to 4 m/min
- + R/C control
ST SELF-POWERED TROLLEY
From 60 to 200 tons
- Three-phase electric
- Capacities from 60 to 200 tons
- Speeds up to 5 m/min
- R/C control.
TROLLEY MAIN FEATURES:
- Great manoeuvrability in small spaces. Turn 360º
- Hydraulic lifting cylinder to facilitate load placement.
- Reduced and economical maintenance.
- Batteries with autonomy up to 1.5 h.
- Remote control system incorporated. Easy and intuitive to drive.
- Touch control screen, camera.
- WIFI for technical service abroad, inspections.
MAIN SECTORS THAT USE THEM
For any movement or transfer of machinery or equipment of large size or weight, Ox & Rud provides self-propelled Trollys. We have three models:
– ST (Electric) 60, 100, 150 and 200t.
– TBC (Electric and Batteries) – 60 and 100t
– MINIFORCE30 (Electric and Batteries) new model.
They are widely used in any industrial sector to move large and/or heavy machinery or equipment within their own facilities or to move them to another location from places that are difficult for cranes to access.
The most common sectors in which these Trolleys are used are: moving machinery, moving o relocation industry, moving factories, moving machinery, and crane companies.
Picture Gallery Of Self Propelled Trolley
Videos of Machine Movers
All Our Products are Designed and manufactured by us
OX-ST Model
The ST motorized trolleys are models have direct three-phase power to the grid, without lifting cylinder nor batteries. It consists of the base of the range, being the most economical, since it must be connected to the grid by means of an electric cable.
To place the load on the self powered trolley, a supplementary system such as lifting a crane or hydraulic jacks is required. (We can also supply them).
FEATURES
– Self propelled trolley (turn 360º).
– Power: 380 VAC III 50 Hz. Optional: different tensions and frequencies.
– Chain and pinion transmission in every wheel.
– Supplied with a remote control and an auxiliar cord control.
– Speed motorized trolley 5 mts/min (without load). With speed variator.
– Polyamide wheels.
OX-TBC Model
This motorized trolley is the most complete model. This model can operate with three-phase mains (380 Vac) or with batteries. You can choose the type of power supply. It also comes with an hydraulic pump that creates the elevation of the cylinder and the rotation of the wheels for your application by means of a geared motor.
FEATURES
– Self propelled trolley have 360ª Turns.
– Power: 380 VAC III 50 Hz and by battery module. Optional: different tension and frequency.
– Chain and pinion drive in every wheel.
– Supplied with a remote control and an auxiliar cord control.
– Main rotating hydraulic cylinder (lift 70 mm the whole load).
– Speed: 4 m/min (without load) 60 tons model & 3 m/min (without load) 100 tons model
– Polyamide wheels.
Accesories and Spare Parts
In case the floor is very slippery it is recommended to use polyurethane wheels (in combination with polyamide wheels) for better traction.
All TBC self powered trolleys are supplied with a battery box for continuous use of approximately 1,5 hours (this time may vary depending on the conditions of use, load, type of floor, etc.).
The auxiliary battery box is a box with wheels for quick change of the supplied with the original trolley, so that we double the working time. The change can be made in one minute.
We supply all our self propelled trolleys with treated wooden box (not included in the price of the trolley) with cover, for better transport and handling. Also we have all kinds of accessories for loads, motor driven trolley, electric chain hoists, long distance hoist, remote control systems, radio remote control, wire rope hoists, electric wire rope, best distance hoist travel, hoists electric chain, push button control, hoists hand chain, single speed hoist, heat treated steel, treated steel wheels
But we can design any type of box, metallic for example, for better storage.
The Batteries
Do you have a concrete need? Are you looking for a unique application? Ask us!
Our engineering department will be happy to help you. Vision cameras, laser sensors, shock bars, automatic guided by magnetic stripe, gps, platforms for large loads etc …
The possibilities are endless.
Also we offer you the possibility to customize your product by chosing the RAL paint you wish, serigraphy with your company logo, etc…
For for more details contact us!
More Information
This type of heavy duty transfer cart, the self propelled trolleys consist motor driven trolley and front rotating traction car (ST-TBC) of reduced dimensions (given the great capacity they have) and a pair of fixed rear trolleys (CT), that perform a function similar to that of the rear axle of a truck, carrying out the displacement and the maneuvers equivalent to this type of transport, but without limitation in the rotation of the tractor unit.
It supports large loads thanks to its multiple wheels of polyamide wheels and tight diameter, mounted on a tilting system (there is also the possibility of including some wheels of polyurethane to improve traction). It has a very low height because it is designed to be placed under any type of structure, machine or element and this be able to move them, supported by the load on its rotating plate, with free rotation, which is coordinated with the couple of rear trolleys (CT) or of another type of rolling incorporated under load.
All the motorized trolleys are controlled by a radio control or an auxiliary control with cable (both supplied in all the trolleys). Its maximum speed is 5m / min, it is designed for flat use (no inclinations). But it could be used on ramps up to a maximum of 3 degrees (although the certification does not contemplate it and is under the responsibility of the customer, since they do not have brakes, only motor, and the capacity calculated is reduced by including inclination). In case of particular needs, default brake can be incorporated.
—————————
At Ox Worldwide we have 2 ranges, motorized trolleys are available in two versions: OX-ST electric motorized trolley (three-phase electric) & OX-TBC (electro-hydraulic and batteries + lifting cylinder) to solve all the needs of moving heavy loads and we can also adjust them to the particular requirements of each application.
We are currently working on the fully electric OX-TBC version, with mixed power to the grid and batteries, and in a much more compact configuration. And for single speed or or various speeds, speed motor driven, single speed motor.
If you need more information do not hesitate to contact our technical and commercial team.
Trolleys Are Also Called
This type of trolley is also called:
- Electric self powered trolley
- Battery powered load moving skates
- Motorized machine skates
- Remote control machine skates
- Battery-Powered Load Skate
- Electrically powered trolleys
- Self-propelled moving skate
- Battery-operated transport systems
- Battery-Powered Machine Skate Set
Battery Powered Machine Skates are a remote controlled heavy duty transport load moving system for the professional internal heavy goods transport of 30 up to 200t. The TBC Battery powered machine skates are capable of carrying up to 100 tons. The ST Electric self powered trolley up to 200 tons and the MINIFORCE Self-propelled moving skate up to 30 tons.
